Setup, Compatibility & Care
Setup:
Ensure the surface you intend to paint is clean, dry, and free from grease or dirt. If there are loose flakes of old paint or varnish, remove them first. For most surfaces like previously painted wood, metal, or plaster, no sanding or priming is necessary. However, Annie Sloan always recommends testing the paint on a small, inconspicuous area first to ensure good adhesion.
Compatibility:
Chalk Paint is designed to adhere to a wide range of materials including wood (bare, painted, varnished), MDF, laminate, metal, glass, plastic, terracotta, stone, brick, concrete, and fabric. It can also be applied over wallpaper (ensure it's well-adhered and not peeling).
Care:
Once the paint is dry, it needs to be sealed for durability and protection. Annie Sloan recommends using Annie Sloan Chalk Paint Wax or Annie Sloan Chalk Paint Lacquer.
- To Apply Wax: Use a lint-free cloth or a dedicated wax brush. Work the wax into the painted surface, covering all areas. Wipe away any excess wax immediately with a clean, lint-free cloth. Allow the wax to dry for at least 24 hours before use, and up to 21 days for full curing.
- To Apply Lacquer: Apply thin, even coats using a synthetic brush or roller. Allow each coat to dry thoroughly before applying the next.
Clean brushes and tools with warm, soapy water immediately after use.