Annie Sloan Chalk Paint - 120Ml - Grey

No, the primary advantage of Annie Sloan Chalk Paint is that it requires minimal to no preparation. You typically do not need to sand or prime surfaces before painting.

While the overall coverage is approximately 13m² per litre, a 120ml pot is suitable for smaller projects like a stool, a small table, or decorative items. Actual coverage will depend on the surface and number of coats applied.

For best results, clean painted surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh scrubbing, especially if the paint has been sealed with wax, as this can damage the finish.

Yes, Annie Sloan Chalk Paint can be used on floors. However, it is essential to finish it with multiple coats of Annie Sloan Chalk Paint Lacquer for durability and protection against foot traffic.

Annie Sloan Chalk Paint dries very quickly to the touch, usually within 15-20 minutes. However, it takes 21 days to fully cure and harden, during which time it should be treated gently.

Chalk Paint Wax provides a soft, matte, and slightly aged finish, offering protection. Chalk Paint Lacquer provides a more durable, non-porous finish that is excellent for high-traffic areas like floors or tabletops, and it is available in matt, silk, or gloss.

While it can be used on outdoor furniture, it is recommended to seal it with Annie Sloan Chalk Paint Lacquer for outdoor durability, as the paint itself is not inherently weatherproof.

Stir the paint thoroughly. If still lumpy, add a small amount of water (about 5-10%) and stir well. Do not add too much water as this can affect the paint's consistency and coverage.

Ensure you are using an appropriate brush and applying the paint evenly. Try using broader strokes or a different brush. Applying a second coat can often even out the finish. Ensure the first coat is completely dry before applying the second.

This can occur if the paint is not fully cured or if the surface is very porous. Ensure the paint is properly sealed with Chalk Paint Wax or Lacquer. If it persists, try applying another thin coat of wax.

Ensure the surface is clean and free from dust, grease, or polish. For very glossy or slick surfaces, a light scuff-sand or a thorough degrease may be necessary before application.