Blackfriar Undercoat - Grey - 250ml

No, this product is specifically designed as an undercoat. It requires a suitable topcoat for final decoration and protection.

It is suitable for wood, metal, plaster, brickwork, and cement, including new and bare surfaces.

Typically, one coat is sufficient, but a second coat may be beneficial on very porous surfaces or when covering a significantly dark colour.

You should allow the undercoat to dry thoroughly according to the product's drying times before applying your topcoat. Check the packaging for specific recommendations.

Yes, this undercoat is suitable for both interior and exterior applications.

Clean brushes and equipment with water immediately after use.

You can apply it using a brush or roller. Ensure even application for the best results.

Ensure the surface was properly prepared (clean, dry, and possibly lightly abraded if glossy). Check that the surface is not excessively damp.

Stir the product thoroughly before and during application. Ensure consistent application with a brush or roller. Allow proper drying time.

Ensure application in a well-ventilated area with moderate temperature and humidity. Avoid applying too thickly.

Apply a second coat of undercoat if necessary, ensuring adequate drying time between coats. The obliterating properties are enhanced with sufficient thickness.