Blackfriar Red Oxide Metal Primer - Red

The primer provides a coverage of 14m²/L/Coat.

It is touch dry within 2-4 hours and fully dry in 3 days.

No, this primer is specifically formulated for ferrous metals like steel and iron. Using it on other metals may not provide the desired protection or adhesion.

The primer can be applied by brush, roller, or spray. Choose the method that best suits your project and experience.

One or two coats are generally recommended, depending on the condition of the metal and the desired level of protection. Ensure each coat is fully dry before applying the next one.

You should wait for at least 16 hours before applying a topcoat. Always refer to the topcoat manufacturer's instructions for specific guidance.

Clean equipment immediately after use with a suitable solvent.

Yes, this primer is suitable for both interior and exterior use.

Ensure the surface is thoroughly cleaned and prepared before application. Remove any existing rust, loose paint, or contaminants. Lightly sand the surface to create a better key for the primer.

Ensure that the primer has been thoroughly stirred. If needed, thin the primer slightly with a suitable solvent, following the manufacturer's instructions.

The surface may not have been properly prepared or may have existing rust. Remove all rust before applying and consider applying a second coat.