Blackfriar Quick Drying Acrylic Primer Undercoat - White - 250ml
The Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home....The Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home. It dries quickly, allowing for a second coat after just 4 hours, enabling you to finish the whole job in one day. This primer is suitable for bare woodwork, hardboard, masonry, dry plaster, and cement. Application can be done by brush or spray. It offers a coverage of 14m²/L/Coat, is touch dry in 1-2 hours, hard dry in 3 days, and recoatable in 4 hours. This specific variant comes in White and a 250ml size.
This guide is designed for anyone using Blackfriar Quick Drying Acrylic Primer Undercoat, specifically the White 250ml variant. It provides information on how to effectively use this primer for various surfaces, offering quick drying times for efficient project completion. Keep in mind that while it offers fast recoat times, complete hardness takes several days.
All features
Colour
White
Model Part Number
BF0380001F1
Brand
Blackfriar
Extended Product Information
FAQs
What surfaces can I use this primer on?
You can use this primer on bare woodwork, hardboard, masonry, dry plaster, and cement.
How long does it take to dry?
It is touch dry in 1-2 hours and recoatable in 4 hours.
Can I use it outside?
Yes, this primer is suitable for both interior and exterior use.
How should I apply the primer?
You can apply it with a brush or spray.
What is the coverage of this primer?
The coverage is 14m²/L/Coat.
What should I do if the primer isn't drying correctly?
Ensure proper ventilation and that the surface is clean and prepared.
Troubleshooting
Primer is not drying properly.
Ensure the room temperature is within the recommended range. Check for proper ventilation. Make sure the surface is clean and free of contaminants.
Primer is peeling or flaking.
Ensure the surface was properly prepared before priming. Lightly sand the area and reapply the primer.
Pros and Cons
Pros
Dries quickly, saving time on projects.
Suitable for a wide range of surfaces.
Can be used both indoors and outdoors.
Easy application with brush or spray.
Allows for multiple coats in a single day.
Cons
Complete hardness takes 3 days.
Coverage is 14m²/L/Coat, so plan accordingly.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, grease, and previous coatings.
Application: Stir the primer thoroughly before use. Apply evenly using a brush or spray.
Drying Time: Touch dry in 1-2 hours. Recoat after 4 hours. Allow 3 days for complete hardness.
Compatibility: This primer is compatible with a wide range of topcoats. Check the topcoat manufacturer's instructions for compatibility.
Clean Up: Clean brushes and equipment with water immediately after use.
Power Tools Direct£5.00Visit shop 
Amazon£10.34Visit shop 
eBay£12.99Visit shop 
