Johnstone's Bathroom Emulsion Paint - Jade - 2.5L

Drying times can vary depending on the environmental conditions. Refer to the paint can for specific drying times, usually between 2-4 hours for touch dry and 16-24 hours for recoating.

While the paint is water-resistant, it's best to avoid direct and constant water contact. It is suitable for areas around the shower, but not inside the shower itself.

Use a damp cloth or sponge with a mild detergent. Avoid abrasive cleaners or scrubbing.

A primer is recommended for new or bare surfaces. It also helps with adhesion when painting over glossy surfaces. For previously painted surfaces in good condition, a primer is often unnecessary.

Johnstone's Bathroom Mid-Sheen Paint is available in a wide range of colors. Check your local retailer for the full selection.

Yes, it is suitable for kitchens due to its moisture-resistant and wipeable properties.

Coverage depends on the surface and the application method. Consult the paint can for coverage details based on the size of the room.

Yes, you can use a paint sprayer, but ensure the sprayer is suitable for emulsion paints and follow the manufacturer's instructions.

Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces to improve adhesion. Apply a primer if necessary.

Make sure the surface is completely dry and free of moisture before painting. Check the existing paint for any loose areas and remove them before applying the new coat.

Apply an even coat of paint and avoid over-brushing. Ensure the roller is evenly loaded with paint. Use a second coat to even out the finish.

Clean the affected area thoroughly with a mold and mildew remover before painting. Ensure good ventilation to prevent future growth.