Johnstone's Washable Matt Emulsion Paint 2.5L - Grey

While this paint is washable and durable, for areas with very high humidity like bathrooms or shower enclosures, a dedicated 'bathroom' or 'kitchen & bathroom' paint with enhanced mould and mildew resistance is usually recommended. Please check the product label for specific recommendations.

Coverage can vary significantly based on surface porosity and texture. As a general guide for emulsion paint, 2.5 litres typically covers approximately 25-30 square metres with a single coat. Always refer to the specific coverage information on the product label for the most accurate estimate.

For optimal colour depth and durability, two coats are generally recommended. If you are painting over a very dark or contrasting colour, a third coat may be necessary to achieve a uniform finish.

For emulsion paints, synthetic brushes are ideal. For rollers, a medium pile roller (e.g., microfibre or woven fabric) is recommended for smooth to lightly textured walls, as it provides good paint pickup and release for an even finish.

Although the paint is touch dry quickly and can be recoated after a few hours, it typically takes 7-14 days for emulsion paint to fully cure and reach its maximum durability and washability. It is advisable to wait until after this curing period for any significant cleaning, using only gentle methods if necessary before then.

This emulsion paint is specifically formulated for interior walls and ceilings. For furniture, skirting boards, or other wooden/metal trim, a dedicated wood and metal paint (such as an eggshell, satin, or gloss finish) is recommended for appropriate durability and adhesion.

Ensure the surface is properly prepared (smooth, clean). Apply paint in thin, even coats, maintaining a wet edge to avoid overlapping dry paint. Use a good quality brush or roller appropriate for emulsion paints.

Check ventilation in the room; ensure good airflow. Humidity and low temperatures can extend drying times. Apply thinner coats if paint is too thick.

Clean spills promptly before they set. Use a soft, damp cloth and gentle pressure. Avoid harsh chemicals or abrasive sponges. Ensure the paint has fully cured (typically 7-14 days) before attempting vigorous cleaning.

Ensure the paint was thoroughly stirred before and during use. Check if the surface was very porous (e.g., new plaster), which might require a mist coat or primer. Apply thin, even coats, allowing sufficient drying time between applications.