Johnstone's Washable Matt Emulsion Paint 2.5L - Silver

This paint is quick-drying. It is typically touch-dry within 1-2 hours and ready for a second coat in 2-4 hours, depending on room temperature and humidity.

For most sound, previously painted surfaces, a primer is not strictly necessary. However, for very porous surfaces (like new plaster), or if you are painting over a significantly darker or contrasting color, using a suitable primer can improve adhesion and coverage.

While it is washable, for areas with very high humidity or moisture levels like bathrooms and kitchens, it's generally recommended to use paints specifically designed for those environments, as they offer enhanced moisture and mould resistance.

A 'low odour formula' means the paint contains fewer volatile organic compounds (VOCs) and produces less of the strong chemical smell typically associated with traditional paints, making it more pleasant to use, especially indoors.

Info needed: Typical coverage for emulsion paint is approximately 10-12 square meters per litre, per coat. Therefore, a 2.5L can would generally cover around 25-30 square meters with one coat. Always refer to the product label for precise coverage rates.

Do not pour paint or cleaning water down drains. Allow small amounts of leftover water-based paint to dry out in the can and dispose of it with household waste. For larger quantities or liquid paint, contact your local authority for information on proper disposal and recycling points.

Ensure the surface was properly prepared (clean, dry, smooth). Stir the paint thoroughly before and during use. Apply paint evenly with a good quality roller or brush, avoiding overloading the tool. Allow adequate drying time between coats and apply a second coat if needed.

Ensure the paint has fully cured (allow 7-14 days after painting for optimal durability). Use a soft, damp cloth and avoid abrasive cleaners or excessive scrubbing. For stubborn marks, a very mild, diluted detergent can be used. Rinse with a clean damp cloth.

Check room temperature and humidity; paint dries best in moderate conditions (e.g., 10-25°C with good ventilation). Ensure thin, even coats are applied. If the surface was very porous, it might absorb more moisture initially, extending drying time for the first coat.

Ensure the surface is not overly porous; a primer may be needed for highly absorbent surfaces. Apply thin, even coats. Factors like surface texture and the original wall color can affect coverage. Always apply two coats for optimal color depth and durability.