Rustins Quick Drying MDF Primer Sealer 1L - White

Yes, Rustins Quick Drying MDF Primer Sealer is suitable for both interior and exterior use. However, ensure the MDF is exterior grade and properly sealed with a suitable topcoat for outdoor applications.

Generally, one coat is sufficient. However, very porous MDF may require a second coat. Allow the first coat to dry completely before applying the second.

You can use a brush, roller, or spray. A brush is suitable for smaller areas, while a roller is better for larger surfaces. Spraying provides a smoother finish.

Yes, Rustins Quick Drying MDF Primer Sealer is compatible with most oil-based and water-based paints. Always test in an inconspicuous area first to ensure compatibility.

It is touch-dry in approximately 30 minutes and can be recoated after 2 hours.

Approximately 6m² per 500ml, providing a total coverage of about 12m² for the 1L tin.

Light sanding is recommended if the MDF surface is rough or has any previous coatings. This improves adhesion.

Yes, it conforms to Toys Safety Regulations 1995, BS EN 71 Part 3, making it safe for use on children's toys.

Ensure the MDF surface was properly prepared (cleaned and lightly sanded). Ensure the primer sealer is fully dry before applying the topcoat. If issues persist, consider using a different topcoat.

Avoid applying too much primer sealer in one go. Ensure even coverage. Lightly sand between coats if necessary. Consider the porosity of the MDF.

Ensure the application area is well-ventilated. Check the temperature and humidity levels. High humidity can slow down drying times.