A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cas...A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cast iron, and galvanised metal. For interior and exterior use. Hazard Safety Codes: Xi, R36. Approx coverage: 14m² per litre. Quickly transform surfaces indoors and out, with this Rustins Quick Dry Metal Paint. It can be applied directly to the metal with no need for a primer, and dries to a smooth, satin finish in just two hours. This white paint is suitable for bare metal, cast iron and galvanised metal. It's a water-based, low-odour formula that contains anti-corrosion additives - two coats will give you adequate coverage, while a third coat will really improve durability.* Coverage of up to 14m² per litre* Touch-dry in just 30 hours* Recoatable in just 2 hours* Two coats for adequate coverage* Three coats recommended for improved durability* Suitable for interior and exterior use* For use on bare and galvanised metal* Can be applied directly with no need for primer* Not suitable for use under cellulose finishes* Water-based, low-odour formula* Dries to a smooth satin finish* 500ml tin - total coverage of up to 7m² Rustins Quick Dry Metal Paint Smooth Satin 500ml in White Iron
Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. Based upon high quality water-borne cross linking acrylic resin.It can be applied directly without the use of a primer and is suitable for indoor and outdoor use.Ideal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours.Brushes can be cleaned with water.
PLEASE NOTE:All items will be shipped and delivered by the following services: Evri,\n DX, DHL and Royal Mail. The service used is dependent on location of \ndelivery, weight of parcel, size of parcel, value of contents and \ncarrier restrictions of transport.\nRustins new formula Quick Dry Metal Paint Black is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. \nIdeal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Brushes can be cleaned with water. \nType: Based on high quality water-borne cross linking acrylic resin. Intended Use: A protective and decorative finish for bare metal, cast iron, and galvanised metal. Special Features: No primer required, low odour, low VOC and quick drying. For inte;
Best current price£4.61from Blueperry agriculture (UK)
This guide provides comprehensive information on Rustins Quick Dry Metal Paint, a water-based paint designed for both interior and exterior metal surfaces. Ideal for DIY enthusiasts and professionals, it offers a quick-drying, low-odour solution with anti-corrosion properties. Note that this paint is not suitable for use under cellulose finishes.
All features
Colour
White
Model Part Number
MPWH500
Brand
Rustins
Extended Product Information
FAQs
What surfaces can I use Rustins Quick Dry Metal Paint on?
You can use it on bare metal, cast iron, and galvanised metal surfaces.
Do I need to use a primer?
No, this paint can be applied directly to the metal surface without a primer.
How many coats of paint should I apply?
Two coats are recommended for adequate coverage, and three coats are recommended for improved durability.
How long does it take for the paint to dry?
It is touch-dry in about 30 minutes and recoatable in 2 hours.
Can I use this paint outdoors?
Yes, this paint is suitable for both interior and exterior use.
What is the coverage of the paint?
Coverage is approximately 14m² per litre.
How do I clean the brushes after use?
Brushes can be cleaned with water.
Is this paint low odour?
Yes, it is a low-odour water-based formula.
Troubleshooting
Paint is not drying properly.
Ensure the surface is clean and free of contaminants. Check the room temperature and ventilation. Allow sufficient drying time between coats.
Paint is peeling or flaking.
Ensure proper surface preparation, including removing loose paint or rust. Apply the paint in thin, even coats, and avoid applying too much paint at once.
Poor coverage.
Apply additional coats to achieve desired coverage. Ensure the paint is properly mixed before application.
Pros and Cons
Pros
Quick drying time reduces project completion time.
No primer needed simplifies the painting process and saves time and money.
Low odour makes it more pleasant to work with, especially indoors.
Suitable for both interior and exterior use, increasing its versatility.
Provides a protective and decorative satin finish.
Contains anti-corrosion additives to protect metal surfaces.
Cons
Not suitable for use under cellulose finishes, limiting its compatibility with certain projects.
Requires multiple coats for optimal durability.
Coverage is dependent on the surface and application method.
Limited colour options compared to some other paint types.
Setup, Compatibility & Care
Setup
Surface Preparation: Ensure the metal surface is clean, dry, and free from rust, loose paint, and grease. Use a wire brush or sandpaper to remove any loose material.
Application: Apply the paint directly to the metal using a brush, roller, or spray gun. Two coats are recommended for adequate coverage, and a third coat will improve durability.
Drying Time: Allow the paint to dry for approximately 30 minutes to touch and 2 hours before recoating.
Compatibility
Suitable Surfaces: Bare metal, cast iron, and galvanised metal.
Not Compatible: Not suitable for use under cellulose finishes.
Clean Up: Clean brushes with water.
Care
Storage: Store the paint in a cool, dry place away from direct sunlight and extreme temperatures.
Maintenance: Clean the painted surface with a mild detergent and water as needed.