Sadolin Extra Durable Woodstain - Mahogany - 2.5L

Sadolin Extra is suitable for all softwood and hardwood joinery, such as doors and windows, except for decking or areas subject to heavy wear or abrasion.

For optimal protection, apply at least two coats. Always follow the manufacturer's recommendations.

It is recommended to use Sadolin Classic as a base coat for new wood, particularly hardwoods, to achieve optimum durability.

Clean brushes and equipment immediately after use with a suitable solvent. Refer to the product label for specific instructions.

Allow adequate drying time between coats, typically 16-24 hours under normal conditions. Check the product label for specific instructions.

Ensure the wood surface is clean, dry, and free from any previous coatings or contaminants. Lightly sand the surface to provide a good key for the woodstain.

Sadolin Extra is available in various colors, including Mahogany. Check the product range for other available colors.

Ensure proper surface preparation (sanding and cleaning) before application. Ensure the surface is completely dry. Apply the stain in thin, even coats and allow sufficient drying time between coats. Excessive build-up can cause cracking.

Stir the product thoroughly before and during application. Apply the woodstain evenly, following the grain of the wood. Ensure consistent application across the entire surface.

Check the temperature and humidity levels; ensure they are within the recommended range. Ensure the product has not expired. Make sure the wood is dry before application.