Best current price£30.36from Amazon
Shopping.co.uk recommended and popular offers
Amazon£30.36Visit shop Cos Natural Sadolin 10 Year Quick Dry Woodstain Long-Lasting Exterior Protection Quick-Drying, Weather Resistant Wood Finish
Visit shop1 offer from £30.36
View price history by clicking the chart icon.
The Sadolin 10 Year Quick Dry Woodstain is an ideal solution for homeowners and professionals looking to protect exterior woodwork with a long-lasting, weather-resistant finish. Its key benefit lies in its advanced UV protection and flexible formula that prevents cracking, though users should note that surface preparation is critical to achieving the full 10-year performance promise. This high-performance woodstain combines rapid drying times with a breathable, microporous coating, ensuring your wood remains protected against moisture and sunlight for years to come.
| Colour | Beige |
|---|---|
| Model Part Number | SN-5101409-1L |
| Brand | COS |
No, this is specifically engineered for exterior wood surfaces exposed to weather and UV light.
For most bare timber applications, the stain can be applied directly; however, ensure the wood is clean and prepped correctly.
No, you must remove existing paint coatings down to bare wood for the stain to penetrate and perform as intended.
We recommend at least two coats for adequate protection, with a third coat recommended for areas subject to extreme weather.
Clean brushes immediately after use according to the instructions on the product label, typically using a brush cleaner or white spirit.
Performance is optimized on stable, properly prepared wood; results may vary on highly resinous or improperly maintained surfaces.
Ensure the application temperature is above 10°C and humidity is low. Thick coats take longer to dry than thin, even layers.
This is often due to uneven wood porosity. Ensure the wood is sanded uniformly before application or apply an additional light coat.
This usually indicates the surface was not properly cleaned or was still damp during application. Strip the area, allow to dry completely, and reapply.
Before application, ensure the wood is clean, dry, and free from any loose material or contaminants like grease or wax. If applying to bare wood, a light sanding is recommended to open the grain for better penetration.
