Johnstone's Washable Matt Emulsion Paint - Blue - 2.5L

Typically, two coats are recommended for best coverage and durability, especially when painting over a contrasting colour or bare plaster. Always allow recommended drying time between coats.

Yes, its washable formulation makes it suitable for these areas for general use. However, for extremely high humidity or condensation-prone areas like shower enclosures, a specialist bathroom or kitchen paint designed for enhanced moisture resistance might offer superior performance.

The paint is typically touch dry within 1-2 hours. Recoat time is usually 2-4 hours. Full hardness and washability are generally achieved after 7-14 days of curing, so be gentle with cleaning during this period.

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly until all paint residue is removed, then allow them to dry naturally.

No, Johnstone's Washable Matt Emulsion Paint is formulated specifically for interior walls and ceilings. For exterior surfaces, you should use a paint designed for outdoor conditions.

On previously painted surfaces in good condition, a primer is often not necessary. However, for bare, porous, or significantly uneven surfaces, or when painting over very dark colours, a suitable primer or a diluted mist coat of this paint can help achieve a better finish and adhesion.

Ensure the surface was properly prepared (clean, dry, smooth). Apply paint in thin, even coats, avoiding overspreading. Use a high-quality roller or brush suitable for emulsion paint. Allow adequate drying time between coats.

Check the room temperature and humidity levels; paint dries best in moderate conditions (e.g., 10-25°C). Ensure good ventilation in the room. Avoid applying overly thick coats, which can prolong drying time.

Wipe spills and marks as soon as possible. Use a soft, damp cloth and avoid abrasive cleaning pads or harsh chemicals. For stubborn marks, a very mild detergent diluted in water can be used sparingly. Ensure the paint has fully cured (typically 7-14 days) before attempting vigorous cleaning.

Paint colours can appear differently based on lighting conditions (natural vs. artificial) and surrounding colours. Always test a small, inconspicuous area first. Ensure the paint was thoroughly stirred before application.