Setup, Compatibility & Care
Setup Instructions
- Preparation: Ensure surfaces are clean, dry, and free from loose material. Fill any cracks or holes and sand smooth. For previously painted glossy surfaces, lightly sand to provide a key. For new, bare, or absorbent surfaces, apply a suitable primer or mist coat (paint thinned with water).
- Application: Stir the paint thoroughly before use. Apply with a brush or roller. For best results and even coverage, typically two coats are recommended.
- Drying: Paint is quick-drying. Allow adequate time between coats (refer to label for specific times, typically 2-4 hours). Ensure good ventilation during application and drying.
Compatibility
This paint is specifically formulated for interior walls and ceilings. It is suitable for plaster, plasterboard, and other common interior surfaces. Not recommended for floors or areas subjected to constant immersion in water.
Care & Maintenance
- For everyday marks and spills, gently wipe the affected area with a clean, damp cloth.
- Avoid using abrasive cleaners or harsh scrubbing, as this may damage the paint finish over time.
- Promptly addressing spills will yield the best cleaning results.