Dulux Weathershield Masonry Paint - Grey - 10L

This paint is specifically designed for exterior masonry surfaces including brick, concrete, pebble-dash, and render.

A 10L tub of Dulux Weathershield Smooth Matt Masonry Paint typically covers up to 15 m² per coat. Remember that two coats are recommended for the best finish.

For a rich depth of color and optimal protective performance, we recommend applying two coats of the paint.

You should allow at least 4 hours for the first coat to dry before applying the second coat. Always ensure the surface is dry to the touch before recoating.

No, this product is formulated specifically for exterior masonry surfaces and is not recommended for interior use.

Yes, Dulux Weathershield paint features protective technology that makes it resistant to ultraviolet (UV) radiation, mould, and water, helping to keep your exterior surfaces looking great for longer.

Yes, this paint is water-based and contains minimal VOCs (Volatile Organic Compounds), making it a safer choice for both you and the environment.

This often indicates poor surface preparation. Ensure the surface is clean, dry, and free from loose material, old flaking paint, or moisture issues before application. If reapplying, thoroughly scrape off all loose paint and re-prepare the surface.

This paint is designed for optimal results with two coats. Ensure each coat is applied evenly and not overspread. Porous surfaces may absorb more paint, affecting coverage; a masonry primer can help in such cases. Always allow sufficient drying time (4 hours) between coats.

While the paint is mould-resistant, existing mould spores must be thoroughly removed before painting. Treat the affected area with a fungicidal wash, rinse, and allow to dry completely before applying the paint.

Drying times can be affected by environmental factors such as high humidity, low temperatures, or poor ventilation. Ensure painting is done in suitable conditions (mild temperatures, low humidity) and apply thin, even coats rather than thick layers.