Dulux Weathershield Masonry Paint - White - 10L

This masonry paint is suitable for brick, concrete, pebble-dash, and render exterior surfaces.

For best results and optimal protection, two coats of Dulux Weathershield Masonry Paint are required.

The quick-drying formula allows you to recoat after just 4 hours.

Yes, it's made with protective technology that makes it resistant to mould, ultraviolet (UV) light, and water, providing excellent durability against weathering.

A 10L can provides coverage for up to 15 m² per coat on average. Coverage can vary depending on the surface texture and porosity.

Yes, it is a water-based paint with minimal VOCs (Volatile Organic Compounds), making it a safer choice for you and your home environment.

This paint is specifically formulated and recommended for exterior masonry surfaces due to its protective weather-resistant properties. While it has minimal VOCs, it's best to use products designed for interior use for indoor projects.

Ensure the surface was properly prepared, clean, and dry. Apply paint evenly using consistent strokes with a brush or roller. Apply the recommended two coats for a uniform finish.

Check ambient temperature and humidity levels. Paint dries slower in cold or damp conditions. Ensure adequate ventilation. Avoid painting in direct, intense sunlight which can cause surface drying before the undercoat is dry.

Ensure any existing mould or algae was thoroughly treated and removed with a fungicidal wash *before* painting. The paint provides resistance but cannot remedy underlying issues not addressed during preparation.

This often indicates poor surface preparation. Ensure the surface was clean, dry, sound, and free of loose material, chalking, or old, failing paint. Sand down any flaking paint and prime if necessary before applying Weathershield.