A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cas...A quick drying water based direct to metal paint. No primer required. Suitable for bare metal, cast iron, and galvanised metal. For interior and exterior use. Hazard Safety Codes: Xi, R36. Approx coverage: 14m² per litre. Quickly transform surfaces indoors and out, with this Rustins Quick Dry Metal Paint. It can be applied directly to the metal with no need for a primer, and dries to a smooth, satin finish in just two hours. This green paint is suitable for bare metal, cast iron and galvanised metal. It's a water-based, low-odour formula that contains anti-corrosion additives - two coats will give you adequate coverage, while a third coat will really improve durability.* Coverage of up to 14m² per litre* Touch-dry in just 30 hours* Recoatable in just 2 hours* Two coats for adequate coverage* Three coats recommended for improved durability* Suitable for interior and exterior use* For use on bare and galvanised metal* Can be applied directly with no need for primer* Not suitable for use under cellulose finishes* Water-based, low-odour formula* Dries to a smooth satin finish* 500ml tin - total coverage of up to 7m² Rustins Quick Dry Metal Paint Smooth Satin 500ml in Green Iron. Rustins new formula Metal Paint Green is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. Ideal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Intended Use: A protective and decorative finish for bare metal, cast iron, and galvanised metal.Type: Based on high quality water-borne cross linking acrylic resin.Special Features: No primer required, low odour, low VOC and quick drying. Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. Based upon high quality water-borne cross linking acrylic resin.It can be applied directly without the use of a primer and is suitable for indoor and outdoor use.Ideal for gates, metal tanks and all ferrous metal surfaces. Not suitable for use under cellulose finishes. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours.Brushes can be cleaned with water.
Green Metal Paint Rustins Quick Dry 500ml Smooth Satin Finish No Primer RequiredFree delivery in 1–3 days£14.99Visit shop →
Product Information
Full details
This guide is for anyone looking to quickly and easily protect and beautify metal surfaces. Rustins Quick Dry Metal Paint in Green offers a fast-drying, water-based solution that requires no primer, saving you time and effort. However, it's important to note that it is not suitable for use under cellulose finishes. This paint is ideal for both interior and exterior use on bare metal, cast iron, and galvanised metal, providing a durable, smooth satin finish in just hours.
All features
Colour
Green
Brand
Rustins
Extended Product Information
FAQs
How much surface area does a 500ml tin cover?
A 500ml tin will cover up to 7m².
Can I use this paint on wood?
No, this paint is specifically designed for use on metal surfaces.
Is a primer necessary?
No, this paint is designed to be applied directly to the metal surface without a primer.
What is the drying time?
The paint is touch-dry in 30 minutes and recoatable in 2 hours.
Is this paint suitable for outdoor use?
Yes, it is suitable for both interior and exterior use.
How many coats should I apply?
Two coats are generally sufficient, but three coats are recommended for improved durability.
How do I clean my brushes after use?
Clean brushes with water immediately after use.
What kind of finish does this paint provide?
It dries to a smooth satin finish.
Troubleshooting
Paint is not drying properly.
Ensure the surface is clean and free of contaminants. Make sure the application environment is well-ventilated. Apply thin, even coats and allow sufficient drying time between coats.
Paint is peeling or flaking.
Properly prepare the surface by removing any existing loose paint or rust. Ensure the surface is degreased before application.
Brush marks are visible.
Use a high-quality brush and apply thin, even coats. Avoid over-brushing. Allow the paint to self-level.
Pros and Cons
Pros
Fast drying time allows for quick project completion.
Eliminates the need for a primer, saving time and effort.
Suitable for both interior and exterior applications.
Water-based formula offers low odour and easy cleanup.
Provides a smooth satin finish that enhances the appearance of metal surfaces.
Cons
Not suitable for use under cellulose finishes.
May require multiple coats for optimal durability.
Coverage is up to 14m² per litre, so a smaller tin will cover less surface area.
Requires careful surface preparation for best results.
Setup, Compatibility & Care
Setup
Surface Preparation: Ensure the metal surface is clean, dry, and free from rust, loose paint, grease, and other contaminants. Use a wire brush or sandpaper to remove rust. Degrease the surface with a suitable cleaner.
Application: Stir the paint thoroughly before use. Apply the paint directly to the metal surface using a brush or roller. Two coats are generally adequate, but three coats are recommended for improved durability. Allow 2 hours between coats.
Drying Time: The paint is touch-dry in approximately 30 minutes and recoatable in 2 hours. Full hardness is achieved after a few days.
Compatibility
Suitable for: Bare metal, cast iron, and galvanised metal.
Not suitable for: Use under cellulose finishes.
Compatible with: Water-based metal paints.
Care
Cleaning: Clean brushes with water immediately after use.
Storage: Store in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the container tightly sealed when not in use.
Maintenance: Regularly inspect painted surfaces for damage or wear. Touch up as needed to maintain protection and appearance.