Water based and quick drying clear satin varnish, touch dry in 30 minutes, recoatable in 4 hours. ...Water based and quick drying clear satin varnish, touch dry in 30 minutes, recoatable in 4 hours. Gives long lasting protection to all external wood, and contains UV inhibitors to prevent fading. This exterior varnish is quick-drying and durable, providing long-lasting protection for all external wood. It is touch dry in 30 minutes and re-coatable in 4 hours. Brushes can be cleaned with water. Available in Gloss and Satin finishes in 250ml, 500ml, 1 litre and 2.5 litres. A Matt finish is also available in 250ml, 500ml and 1 litre sizes. Coverage is approximately 12-15 square meters per litre for one coat.
Best current price£3.65from Blueperry agriculture (UK)
This guide is for anyone looking to protect and enhance the natural beauty of their outdoor wooden surfaces. Rustins Outdoor Varnish provides long-lasting protection with UV inhibitors to prevent fading, making it ideal for exterior wood. However, optimal results require proper surface preparation. This quick-drying varnish offers a durable, satin finish and is easy to apply.
All features
Model Part Number
EAVS1000
Brand
Rustins
Extended Product Information
FAQs
How long does it take for the varnish to dry?
The varnish is touch dry in approximately 30 minutes and recoatable in 4 hours.
What surfaces can I use this varnish on?
This varnish is suitable for all external wooden surfaces, including doors, window frames, and garden furniture.
How many coats of varnish should I apply?
For optimal protection, two to three coats are generally recommended.
How do I clean the brushes after use?
Brushes can be cleaned with water.
What is the coverage rate?
Coverage is approximately 12-15 square meters per litre for one coat.
Does this varnish protect against UV damage?
Yes, it contains UV inhibitors to prevent fading and protect the wood from the sun.
What finishes are available?
The varnish is available in Gloss, Satin, and Matt finishes.
Where should I store the varnish?
Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
Varnish is not drying properly.
Ensure the application environment has adequate ventilation and temperature. Make sure coats are thin and applied correctly.
The finish is not smooth.
Sand lightly between coats and ensure you are using a good quality brush. Avoid applying too much varnish at once.
The varnish is peeling or flaking.
The surface was not properly prepared. Remove the old varnish, prepare the surface correctly, and reapply.
Pros and Cons
Pros
Quick drying time reduces project duration.
Provides durable protection against weather and UV damage.
Easy water cleanup simplifies the application process.
Available in multiple finishes to match various design needs.
Good coverage, approximately 12-15 square meters per litre per coat.
Cons
Requires proper surface preparation for optimal results.
Multiple coats may be necessary for the best protection.
Performance depends on the correct application.
May require more coats in areas of high exposure.
Setup, Compatibility & Care
Surface Preparation:
Ensure the wood surface is clean, dry, and free from any old varnish, dirt, grease, or wax.
Sand the surface smooth, then remove any sanding dust.
For new wood, apply a suitable primer before varnishing.
Application:
Stir the varnish thoroughly before use.
Apply thin, even coats using a brush, following the grain of the wood.
Allow the recommended drying time (30 minutes to touch dry, 4 hours to recoat) between coats.
Two to three coats are generally recommended for optimal protection.
Compatibility:
Compatible with most types of wood used for outdoor applications.
Always test on a small, inconspicuous area first to ensure compatibility.
Care:
Clean brushes with water immediately after use.
Store the varnish in a cool, dry place, away from direct sunlight and extreme temperatures.
Regularly inspect the varnished surface and reapply as needed to maintain protection.