Cuprinol Decking Stain - Vermont Green - 2.5L

It covers up to 8 m² per litre.

It dries in 2-6 hours, depending on the conditions.

Apply 2-3 coats for best results.

Yes, but you may need to touch up bare areas and allow to dry before finishing with further coats.

Avoid applying if rain is likely before the product has dried. If it does rain, allow the surface to dry completely and assess if a further coat is needed.

Remove as much stain as possible from brushes and rollers before cleaning with water.

No, it is suitable for outdoor use only.

Ensure the surface is properly prepared and free from old coatings. Apply the stain evenly and avoid overlaps.

Check the temperature and humidity. Ensure the application is done in suitable conditions (above 5°C) and allow sufficient drying time.

Ensure the surface was thoroughly cleaned before application. Reapply the stain as needed, following the application instructions.