Cuprinol UV Guard Decking Oil 5L - Brown

The drying time is approximately 6 hours, but this is dependent on the nature of the surface and the weather conditions. Ensure good ventilation.

This product is specifically designed for decking. For sheds, a different Cuprinol product might be more suitable depending on the wood type and desired finish.

The surface coverage is approximately 8 square meters per litre, depending on the absorbency of the wood.

Remove as much oil as possible from your equipment before cleaning with water. Water-based formulas allow for easy cleanup with water.

No, this product is only suitable for bare or previously oiled decking. It will not adhere properly to paint.

'UV Guard' indicates that the oil contains additives to protect the wood from harmful ultraviolet rays from the sun, preventing fading and degradation.

This product is ideal for softwood decking. For hardwood, results may vary, and it's recommended to test on an inconspicuous area first.

The wood may have been too weathered. You may need to use Cuprinol Decking Restorer first to remove the grey layer before applying the oil.

This is likely due to applying too much oil or allowing puddles to form. Ensure even application and wipe away any excess that hasn't penetrated.

Ensure the product is thoroughly shaken and mixed before and during use. If stored in cold conditions, bring it to room temperature.

This is a sign the oil is working effectively and repelling water. If the beading stops and the wood absorbs water, a reapplication may be needed.