Cuprinol Anti-Slip Decking Stain - City Stone

The anti-slip effect is designed to be durable, but its longevity depends on foot traffic and weather exposure. Reapplication is typically recommended every 1-2 years to maintain optimal protection and grip.

Yes, as long as the existing stain is sound, not flaking, and has been cleaned. It's always advisable to test on an inconspicuous area first.

Drying time varies depending on temperature and humidity. Typically, it is touch-dry in 1-2 hours and ready for a second coat after 4-6 hours. Allow at least 24 hours before heavy use.

Two coats are generally recommended for optimal colour, protection, and anti-slip performance. A third coat may be beneficial for heavily weathered or high-traffic areas.

Yes, 'City Stone' is a shade of grey. The final appearance can vary slightly depending on the type of wood and the number of coats applied.

While designed for decking, it can be used on other exterior wooden structures. However, ensure the surface is suitable and follow application guidelines. Test on a small area first.

Clean brushes and equipment immediately after use with water and a mild detergent.

Ensure the product is thoroughly stirred before and during application. Apply thin, even coats and avoid over-brushing. If the issue persists, a third light coat may be necessary once the previous coat is dry.

Verify that the decking surface was properly cleaned, dry, and free from contaminants before application. Ensure previous finishes were not flaking or unstable.

Ensure sufficient coats have been applied. The anti-slip properties develop with the dried film. Check if the product has been applied too thinly or if the surface is excessively smooth.

Ensure the wood was thoroughly cleaned of existing algae before application. Reapply the stain as per recommendations, especially if the area is prone to dampness.