Rustins Strypit Paint & Varnish Stripper 1L - Orange

Rustins Strypit can be used on wood, metal, glass, stone, and masonry surfaces.

Rustins Strypit is a non-caustic formula, dichloromethane-free, but it's important to use it in a well-ventilated area and follow the safety instructions on the label.

The dwell time varies depending on the paint or varnish being removed. Check the product instructions for specific guidance, but generally, 15-30 minutes is typical. Heavily coated surfaces may require a longer time.

Use a scraper to remove the softened finish. For detailed areas, a wire brush or scraper may be helpful.

Clean the surface with water or solvent, as recommended on the product label. Always follow the manufacturer's instructions for disposal.

Rustins Strypit is typically a one-time use product. The product will lose its effectiveness over time.

Always work in a well-ventilated area. Wear appropriate protective equipment, such as gloves and eye protection. Avoid contact with skin and eyes. Follow all safety instructions provided on the product label.

Allow for a longer dwell time. Reapply if necessary. Ensure that the surface is completely covered and that the product is suitable for the type of paint being removed.

Ensure a thick, even coat is applied and avoid applying too much at once. Ensure the area is not excessively hot.

Use the appropriate solvent or water, as indicated on the product label and clean the surface thoroughly after stripping.