Rustins Quick Dry Aluminium Paint - Silver - 250ml

You can use it on bare wood and metal surfaces, as well as over primers.

It is touch dry in approximately 2 hours.

Yes, it is suitable for both interior and exterior use.

The surface should be clean and free from grease and wax. If the metal is rusty, remove loose rust with a wire brush and treat with Rustins Rust Remover.

Two coats may be sufficient, but three coats are recommended for best results.

Clean brushes with water immediately after use.

Coverage is approximately 12m² per coat per litre.

Yes, it is heat resistant up to 105°C.

Ensure the surface is clean and free from contaminants. Check the room temperature and ventilation, as inadequate conditions can affect drying time.

Ensure the surface has been properly prepared. Lightly sand the surface, clean and reapply.

Apply additional coats to achieve desired coverage. Ensure even application and proper drying time between coats.