Smartseal Block Paving Sealer - Silk Wet Look, 2 X 5L

The sealer typically lasts for 2-3 years, depending on the amount of wear and weather conditions. Reapplication is recommended to maintain optimal protection.

No, the surface must be completely dry before applying the sealer. This allows for proper adhesion and prevents clouding.

Clean the sealed surface with mild soap and water. Avoid using harsh chemicals or abrasive cleaners.

While it can be applied with a brush, a sprayer or roller is recommended for more even coverage and a better finish.

Coverage varies depending on the porosity of the paving, but typically 4-6 square meters per liter.

Smartseal Block Paving Sealer is a solvent-based product; ensure proper ventilation during application and dispose of empty containers responsibly.

Yes, Smartseal Block Paving Sealer is suitable for use on patios and other block paving and flagstone surfaces.

This is often due to applying the sealer in damp conditions or too thickly. Ensure the surface is completely dry before application and apply thin, even coats.

Ensure the surface was thoroughly cleaned and free of any previous sealers or contaminants. Use a primer if necessary.

Avoid over-application. If the surface is slippery, it may be due to excess sealer. Allow it to dry completely and consider applying a non-slip additive during the next application.

Ensure the surface was properly prepared before application. Reapply the sealer, making sure to cover all areas thoroughly. Consider using a weed killer before reapplication.