Smartseal Block Paving Sealer - 5L - 3 Pack

Coverage is approximately 2m² per litre for the first coat and 3.5m² per litre for the second coat.

It is compatible with most types of block paving. It's recommended to test in an inconspicuous area first.

Drying times vary depending on weather conditions. Allow sufficient time for each coat to dry before use.

Two coats are generally recommended for optimal protection and appearance.

Wipe up spills immediately to prevent staining.

Regularly sweep the paving to remove debris. Clean spills promptly with a suitable cleaner.

Yes, it is weather-resistant and can withstand rain, heat, and freezing temperatures.

It's best to apply the sealer when the paving is not in direct sunlight to prevent it from drying too quickly. Ideally, apply in the shade.

Ensure the surface is completely clean, dry, and free from contaminants before application. Re-apply the sealer, following all preparation instructions.

This can be caused by applying the sealer in damp conditions or over a surface that isn't fully dry. Ensure the paving is completely dry before applying. If this happens, apply a thin coat over the affected area.

This may be caused by applying too much sealer or applying it to a surface with an existing sealer. Remove the old sealer and apply a fresh coat following all instructions.

Ensure even coverage during application. Use a sprayer or roller to avoid thick spots. Apply a second coat to achieve an even appearance.