Rustins Step & Tile Paint - Red - 500ml

This paint is suitable for use on tiles, concrete, and bricks.

No, this paint is not suitable for glazed or quarry tiles.

A 500ml tin will cover approximately 3.5m² per coat, depending on the surface.

The surface must be clean, smooth, sound, and free from wax. Remove any wax polish with white spirit.

Apply the paint with a brush or roller. One coat is usually sufficient, but multiple coats may be needed.

The paint is quick-drying, but drying times will vary based on environmental conditions. Always allow the paint to fully cure for maximum durability.

Clean tools immediately after use. Clean spills promptly with a damp cloth.

Ensure adequate ventilation. Check the room temperature and humidity levels. Ensure the surface is properly prepared.

Ensure the surface is properly prepared. Apply an even coat of paint. Apply a second coat if necessary.

Ensure the surface is clean, dry, and free of wax. Lightly sand glossy surfaces before application.