Rustins Brick & Tile Paint - Matt Red - 500ml

This paint is suitable for brick, tile, cement, stone, and other masonry surfaces. Always test in a small, inconspicuous area first.

Two coats are generally recommended for optimal coverage and durability.

The paint is quick-drying, but allow sufficient time for it to fully cure before exposing it to heavy use or the elements. Refer to the product label for specific drying times.

Clean tools with water immediately after use.

Yes, this paint is designed for both interior and exterior use and is weather-resistant.

One litre of paint covers approximately 14m² in a single coat.

Yes, but ensure the existing paint is in good condition, clean, and properly prepared. Lightly sand the surface if necessary, and always test in a small area first.

Ensure the surface is thoroughly cleaned and free of any contaminants. Lightly sand glossy surfaces for better adhesion. Apply a primer suitable for masonry surfaces if needed.

Ensure the paint is well-mixed. Apply an even coat and avoid over-brushing. Apply a second coat to achieve a consistent finish. Ensure you are applying the paint within the recommended temperature range.

Make sure the surface is completely dry before painting. Ensure proper surface preparation. Apply a primer suitable for masonry surfaces if needed.