Rustins Quick Dry Red Oxide Metal Primer - 500ml - Red
A low odour, high-performance primer containing anti-corrosive additives for use on all bare metal...A low odour, high-performance primer containing anti-corrosive additives for use on all bare metal surfaces, interior and exterior. Formulated with acrylic and special anti-corrosive pigments to prevent corrosion. Apply using a quality brush. One coat is normally sufficient, but a second coat may be applied if required. The surface may be cleaned with a mild detergent solution or white spirit as necessary. Must be over-painted with an undercoat before applying a top coat. Stir well before use. Dry time: Approx. 30 minutes, depending on temperature and humidity. Recoat: Approx. 4 hours. Coverage: 12-15m per 1 litre.
Best current price£4.76from Blueperry agriculture (UK)
This guide is for anyone using Rustins Quick Dry Red Oxide Metal Primer to protect metal surfaces from corrosion. The primer's quick-drying formula and anti-corrosive properties provide a robust base for your paintwork, ideal for both interior and exterior applications. However, remember to always apply an undercoat before your top coat for the best results.
All features
Colour
Red
Model Part Number
REDOW500
Brand
Rustins
Extended Product Information
FAQs
What is the coverage rate?
The coverage rate is approximately 12-15m² per litre.
How long does it take to dry?
It dries in approximately 30 minutes.
Can I use it on exterior surfaces?
Yes, it is suitable for both interior and exterior use.
Do I need to apply an undercoat?
Yes, you must apply an undercoat before applying the top coat.
How should I clean the surface before applying the primer?
Ensure the surface is clean, dry, and free from rust, grease, and loose particles.
How do I clean my brushes after use?
Clean brushes with a mild detergent solution or white spirit.
How many coats of primer are needed?
One coat is usually sufficient, but a second coat can be applied if required.
What is the recoat time?
The recoat time is approximately 4 hours.
Troubleshooting
Primer not drying properly.
Ensure adequate ventilation and check the temperature and humidity levels. Allow sufficient drying time before applying subsequent coats.
Primer not adhering to the surface.
Make sure the surface is clean and properly prepared. Lightly abrade the surface to improve adhesion if necessary.
Brush marks visible after application.
Apply the primer in thin, even coats, and avoid over-brushing. Use a high-quality brush for a smoother finish.
Pros and Cons
Pros
Quick drying time.
Effective anti-corrosive properties.
Suitable for various metal surfaces.
Low odour for comfortable use.
Easy to apply with a brush.
Good coverage rate.
Cons
Requires an undercoat before the top coat.
Recoating requires a 4-hour wait time.
Setup, Compatibility & Care
Setup
Preparation: Ensure the metal surface is clean, dry, and free from rust, grease, and loose particles. Lightly abrade glossy surfaces to improve adhesion.
Stir: Stir the primer well before use.
Application: Apply using a quality brush.
Coats: One coat is usually sufficient, but a second coat can be applied if needed.
Compatibility
Suitable Surfaces: Bare metal surfaces (interior and exterior).
Overcoating: Must be over-painted with an undercoat before applying a top coat.
Care
Cleaning: Clean the surface with a mild detergent solution or white spirit as necessary.
Storage: Store in a cool, dry place, away from direct sunlight.