Wavin OsmaWeld Waste Pipe - 50mm - 3M - White

It is designed for the efficient disposal of waste water in domestic and commercial plumbing systems.

You must use Wavin OsmaWeld solvent weld fittings. This pipe is not compatible with push-fit or compression fittings.

It is suitable for constant temperatures up to 60°C and intermittent discharges up to 90°C.

Painting is not recommended as it may affect the integrity of the ABS material. It is available in white, grey, and black to suit different needs.

You need to use Wavin OsmaWeld solvent cement and primer according to the manufacturer's instructions for a secure solvent weld joint.

While durable, this pipe is primarily designed for above-ground waste water systems. Check specific product data for underground suitability.

It signifies that the product has been independently tested and certified to meet the stringent European standards for plastic piping systems for soil and drain applications.

Ensure surfaces were clean and dry before applying solvent cement. Re-cut pipe and fitting if necessary and re-join, ensuring adequate solvent cement application and sufficient holding time during curing.

This indicates exposure to temperatures above the recommended limit. Check the temperature of the waste water and consider an alternative material if temperatures consistently exceed 60°C.

Check for obstructions or damage inside the fitting socket. Ensure the pipe end is not deformed. Gently twist the pipe as you insert it.