Wavin OsmaWeld Plain Ended Pipe - 32mm - White - 3m

Its main purpose is to form secure, permanent joints in waste drainage systems using solvent weld technology, suitable for both domestic and commercial applications.

This pipe is designed to be used with Wavin OsmaWeld solvent weld fittings. It is available in 32mm and 50mm sizes and is compatible with other 32mm pipe sizes within the OsmaWeld system.

Yes, it can handle constant temperatures of 60°C and intermittent discharges up to 90°C. It is primarily for waste water disposal.

You will need Wavin OsmaWeld solvent weld cement and primer (if recommended by the cement manufacturer) to create a secure joint with compatible fittings.

While durable, this pipe is primarily designed for above-ground solvent weld waste systems. For underground drainage, specific underground drainage systems and jointing methods are typically recommended.

This certification indicates that the pipe has been independently tested and meets the stringent quality and safety requirements of the British Standard for waste water systems made of plastic piping systems.

This specific product is a 3-meter length pipe.

Ensure the correct solvent weld cement was used and applied properly. Re-cut pipe and fitting, clean, and re-joint following instructions. Check that the pipe was fully inserted into the fitting socket.

Verify that you are using the correct size fitting and that both the pipe end and fitting socket are clean and free from obstructions. Ensure adequate solvent cement has been applied, as it acts as a lubricant.

Check for blockages within the pipe or fittings. Ensure the system has adequate fall (gradient) as per plumbing regulations. Inspect joints for any internal protrusions.

Ensure the pipe is not exposed to temperatures exceeding its operational limits (constant 60°C, intermittent 90°C) or incompatible chemicals. Check for external damage.