Best current price£6.91from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£6.91Visit shop Floplast Grey Push Fit Waste Pipe - 40Mm X 3Mtr
Visit shop4 offers from £6.91 - £18.00
View price history by clicking the chart icon.
The FloPlast Push Fit Waste Pipe is an ideal solution for both professional plumbers and DIY enthusiasts looking for a reliable, easy-to-install wastewater drainage system. Crafted from durable polypropylene, this 50mm diameter pipe streamlines installation by eliminating the need for complex solvent welding, making it perfect for efficient residential and commercial drainage projects. While it offers superior ease of use, it is important to remember that all cut ends must be properly deburred and account for thermal expansion to maintain a leak-free system.
| Model Part Number | WP03G |
|---|---|
| Brand | FloPlast |
Yes, it is designed for continuous operation up to 76°C and can handle intermittent flows up to 100°C.
No, this is a push-fit system. Glue or solvent welding is not required and should not be used on the push-fit joints.
This pipe has a 50mm external diameter.
Use a fine-tooth saw to achieve a square cut, and always use a file or deburring tool to smooth the edges before fitting.
You would generally need a specific transition fitting if you are switching between push-fit and solvent weld systems.
It is recommended to pull the pipe back approximately 10mm from the fully pushed-in position to allow for material movement due to temperature changes.
Ensure the pipe end is square and free of burrs. Apply a small amount of silicone lubricant to the pipe end or check if the internal seal is correctly seated.
Check that the pipe was inserted far enough and that the internal rubber seal is not damaged or pinched during assembly.
Installation is straightforward but requires attention to detail for long-term performance. First, use a fine-tooth saw to cut the pipe to the desired length, ensuring the cut is perfectly square. Crucially, you must deburr the edge of the pipe after cutting; a rough edge can damage the internal rubber seals inside the fittings, leading to leaks. When inserting, push the pipe into the fitting, then pull it back by roughly 10mm to allow for thermal expansion of the material. Avoid using abrasive cleaners on the pipe surface to maintain its high-gloss finish.
FloPlast Push Fit Waste Pipe - 32mm x 3m - GreyFrom £7
FloPlast Round Downpipe - 68mm x 2.5M GreyFrom £9
Solvent Waste Pipe - 50mm - 3m - BlackFrom £16
Round Downpipe - 68mm x 4mtr - Anthracite GreyFrom £17
Wavin OsmaWeld Plain Ended Pipe - 32mm - White - 3mFrom £11
Wavin OsmaWeld Plain Ended Pipe - 40mm - 3mFrom £13
Wavin OsmaWeld - 40mm - Black - 3mFrom £13
Wavin OsmaWeld Waste Pipe - 50mm - 3M - WhiteFrom £15
GoodHome Hard Surface Protector Roll - 20M L x 0.83M WFrom £22
Wavin Osma Push-Fit Waste Pipe - 40mm - 3m - WhiteFrom £8
FloPlast Miniflo Round Downpipe - 50mm Dia - 2m L - GreyFrom £11
Round Downpipe - FloPlastFrom £11