Best current price£6.02from Professional Building Supplies
Shopping.co.uk recommended and popular offers
Professional Building Supplies£6.02Visit shop Floplast Grey Push Fit Waste Pipe - 32Mm X 3Mtr
Visit shop1 offer from £6.02
View price history by clicking the chart icon.
The FloPlast 32mm x 3m Push Fit Waste Pipe is an ideal solution for plumbers and DIY enthusiasts who require a reliable, high-quality pipe for domestic wastewater drainage, such as connecting washbasins and bidets. Its primary benefit is the rapid installation time afforded by the push-fit mechanism compared to solvent welding, though users must be diligent in ensuring pipe ends are cut square and deburred to prevent leaks or joint failure.
| Model Part Number | 1328147 |
|---|---|
| Brand | FloPlast |
No, this is specifically designed for a push-fit system with rubber seals; solvent welding will not create a reliable bond with this material.
It is designed for standard domestic wastewater, which includes the intermittent flow of hot water from sinks and bidets.
No, this system relies on integral rubber seals. Gluing is not required and can damage the integrity of the fitting.
This pipe is intended for internal use as part of a building's wastewater drainage system.
You will need a pipe cutter or fine saw, a file or sandpaper for deburring, and potentially silicone lubricant.
Ensure the pipe is cut perfectly square and free of burrs that could damage the internal seal.
Apply a small amount of silicone-based plumbing lubricant to the end of the pipe.
Ensure that adequate pipe clips are used at appropriate intervals to support the pipe run.
To install this system correctly, ensure you have a sharp pipe cutter or fine-toothed saw to achieve a square cut. Always remove any rough edges or burrs from the cut end using a file or sandpaper to ensure the internal seal is not damaged. When inserting the pipe into the fitting, apply a light coat of silicone lubricant if the connection feels too tight. To maintain the system, periodically check the joints for signs of moisture. If a joint begins to leak, simply disconnect it, inspect the rubber O-ring seal for debris or damage, clean or replace if necessary, and re-seat the pipe.
FloPlast Push Fit Waste Pipe - 50mm x 3mtr Grey - WP03GFrom £13
FloPlast Round Downpipe - 68mm x 2.5M GreyFrom £9
Solvent Waste Pipe - 50mm - 3m - BlackFrom £16
Round Downpipe - 68mm x 4mtr - Anthracite GreyFrom £17
Wavin OsmaWeld Plain Ended Pipe - 32mm - White - 3mFrom £11
Wavin OsmaWeld Plain Ended Pipe - 40mm - 3mFrom £13
Wavin OsmaWeld - 40mm - Black - 3mFrom £13
Wavin OsmaWeld Waste Pipe - 50mm - 3M - WhiteFrom £15
GoodHome Hard Surface Protector Roll - 20M L x 0.83M WFrom £22
Wavin Osma Push-Fit Waste Pipe - 40mm - 3m - WhiteFrom £8
FloPlast Miniflo Round Downpipe - 50mm Dia - 2m L - GreyFrom £11
Round Downpipe - FloPlastFrom £11