Ronseal High Performance Wood Filler - White - 1kg

Yes, this wood filler is suitable for both interior and exterior use. Ensure you protect it with a suitable paint or varnish for exterior applications.

The filler fully cures in 30 minutes.

Priming is not always required, but for best results, particularly on porous wood, consider priming before filling. Always ensure the surface is clean and prepared.

Yes, once the filler is fully cured and sanded, you can stain it to match the surrounding wood. Always test the stain on a small area first.

You will need a filling knife or similar tool for applying the filler. Sandpaper will be needed for smoothing the surface after curing.

Store the wood filler in a cool, dry place. Ensure the container is tightly sealed when not in use.

If treating damage caused by wet rot, use in conjunction with Ronseal Wet Rot Hardener (code 94441).

Ensure the wood surface is clean and dry. Check the product's expiration date. Ensure you are using the correct application instructions. If treating wet rot, ensure Wet Rot Hardener has been applied and fully absorbed before filling.

Apply the filler in layers, allowing each layer to dry before applying the next. Overfill slightly to allow for sanding.

Ensure the filler is fully cured. Use appropriate sandpaper grit for wood filler (medium to fine grit).