Bedec Aqua Advanced Satin Paint - White 2.5L

Bedec Aqua Advanced Satin Paint is suitable for wood, metal, and existing painted surfaces. Always test on a small area first.

For optimal results, apply two thin coats, allowing the paint to dry fully between coats.

The paint typically dries to touch within 2-4 hours. Allow several days for full hardness to be achieved.

Yes, Bedec Aqua Advanced Satin Paint is suitable for both interior and exterior use.

Clean brushes and equipment with water immediately after use.

The paint covers approximately 13 to 15 square meters per litre.

Yes, it has a low-odour, water-based formula, making it more pleasant to work with.

Yes, the paint is non-yellowing and designed to maintain its brilliant white finish.

Ensure the surface is properly prepared by cleaning, sanding, and priming if necessary.

Apply thin, even coats and avoid over-brushing. Use a good quality brush or roller.

Ensure the room is well-ventilated and the temperature is within the recommended range. Avoid applying in high humidity conditions.

Use a high-quality brush or roller designed for water-based paints, and apply the paint evenly. Thin the paint slightly if necessary.

Stir the paint thoroughly before and during application. Apply an even coat and avoid excessive buildup.