Blackfriar Acrylic Floor Paint provides an attractive, tough and durable finish for surfaces such ...Blackfriar Acrylic Floor Paint provides an attractive, tough and durable finish for surfaces such as brickwork, concrete, cement, wood, metal and stone. It protects floors with an easy-to-clean thermoplastic coating and stops the dusting of concrete surfaces. It also resists grease, oil and weak solutions of acid and alkali, making it ideal for domestic, commercial and light industrial use. This water-based paint is low odour and quick drying, suitable for both indoor and outdoor use and can be applied to previously painted surfaces. Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed. New concrete must be left for at least 6 months before applying. Recommend two coats. Coverage: 10-12m2/L/Coat. Hard Dry: 4-6 hours at 20ºC.
Blackfriar Black Anti Slip Floor Paint 1L 5013296361118Free delivery in 1–3 days£35.06Visit shop →
Blackfriar Polyurethane Floor Paint - Hard Wearing - Black - 2.5 Litre 5013296360845Free delivery in 1–3 days£43.94Visit shop →
Blackfriar Black Anti Slip Floor Paint 2.5L 5013296361101Free delivery in 1–3 days£52.02Visit shop →
Blackfriar Black Anti Slip Floor Paint 5L 5013296361095Free delivery in 1–3 days£84.44Visit shop →
Product Information
Full details
This guide is for anyone looking to protect and beautify their floors using Blackfriar Acrylic Floor Paint in Black. It provides a durable, easy-to-clean finish for various surfaces, resisting common household chemicals. However, proper surface preparation is crucial for optimal results. This guide covers key features, usage instructions, and troubleshooting tips to ensure a successful application.
All features
Colour
Black
Brand
Blackfriar
Extended Product Information
FAQs
How many coats of paint are needed?
Two coats are recommended for the best protection and appearance.
What surfaces can I use this paint on?
It is suitable for brickwork, concrete, cement, wood, metal, and stone.
How long does it take for the paint to dry?
It is hard dry in 4-6 hours at 20°C.
Can this paint be used outdoors?
Yes, it is suitable for both indoor and outdoor use.
What is the coverage per liter?
Approximately 10-12m²/L/Coat.
Do I need to prime the surface before painting?
Priming is not always necessary, but ensure the surface is properly prepared.
How do I clean the painted surface?
Clean the painted surface with a mild detergent and water.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and free of any contaminants. Lightly sand the surface to improve adhesion.
Paint is flaking or peeling.
Remove the flaking paint, prepare the surface correctly, and apply a new coat.
Uneven finish.
Ensure even application and avoid applying too much paint at once. Apply a second coat if necessary.
Pros and Cons
Pros
Durable and long-lasting protection for floors.
Suitable for a wide range of surfaces.
Easy to clean and maintain.
Cons
Requires thorough surface preparation for best results.
New concrete needs to cure for 6 months before application.
Two coats are recommended for optimal coverage.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is sound, clean, dry, and free from grease or any substance that may affect adhesion. Scrape off any old or flaking paint.
New Concrete: Allow new concrete to cure for at least 6 months before applying the paint.
Application: Apply two coats for optimal results.
Coverage: Approximately 10-12m²/L/Coat.
Drying Time: Hard dry in 4-6 hours at 20°C.
Compatibility: Compatible with previously painted surfaces.
Care: Clean the painted surface regularly with a mild detergent and water.