An attractive, tough, durable and high opacity floor coating that contains special aggregates for ...An attractive, tough, durable and high opacity floor coating that contains special aggregates for outstanding slip resistance. Suitable for indoor and outdoor use on concrete, cement, wood, metal and stone surfaces. Resists grease, oil and weak solutions of acid and alkali. Ideal for light industrial and domestic floors. Apply by brush or roller. Coverage: 6-10m²/L/Coat. Hard Dry: 4-6 hours at 20°c. Recoatable: 16 hours.
Best current price£10.31from Blueperry agriculture (UK)
This guide helps users effectively apply and maintain Blackfriar Anti-Slip Floor Paint in Light Grey. Ideal for both indoor and outdoor concrete, cement, wood, metal, and stone surfaces, this paint provides a durable, slip-resistant finish. While offering excellent protection against grease, oil, and mild chemicals, it's crucial to ensure proper surface preparation for optimal adhesion and longevity.
All features
Colour
Grey
Brand
Blackfriar
Extended Product Information
FAQs
What is the coverage rate?
Coverage is approximately 6-10m²/L/Coat. Adjust quantities according to the surface conditions and number of coats.
How long does it take to dry?
Hard dry time is 4-6 hours at 20°C. Recoat after 16 hours.
Can this paint be used outdoors?
Yes, Blackfriar Anti-Slip Floor Paint is suitable for both indoor and outdoor use.
What surfaces can I use this paint on?
It is suitable for concrete, cement, wood, metal, and stone surfaces.
Is this paint resistant to chemicals?
Yes, it resists grease, oil, and weak solutions of acid and alkali.
How should I apply this paint?
Apply by brush or roller in even coats. Two coats are recommended.
How do I clean the painted surface?
Regularly clean the painted surface with mild detergent and water.
Troubleshooting
Paint is not adhering properly.
Ensure the surface was properly prepared (cleaned and abraded) before application. Allow for longer drying times if conditions are colder.
The finish is not slip-resistant.
Ensure the paint was stirred thoroughly before use and that the application was even.
Paint is peeling.
Make sure the surface is completely dry before painting. Ensure the surface is compatible with the paint.
Pros and Cons
Pros
Provides excellent slip resistance, enhancing safety in potentially hazardous areas.
Durable and long-lasting, reducing the need for frequent reapplication.
Suitable for a wide range of surfaces, increasing its versatility.
Resistant to common chemicals like grease and oil, making it ideal for garages and workshops.
Easy application by brush or roller, simplifying the painting process.
Cons
Requires proper surface preparation for optimal adhesion.
Recoating requires a 16-hour waiting period.
Coverage is 6-10m²/L/Coat, so the required amount needs to be carefully calculated.
Hard dry time is 4-6 hours, which can impact project timelines.
Setup, Compatibility & Care
Preparation:
Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, grease, oil, and existing coatings. Lightly abrade smooth surfaces to improve adhesion.
Mixing: Stir the paint thoroughly before use to ensure the anti-slip aggregates are evenly distributed.
Application: Apply the paint by brush or roller in even coats. Two coats are recommended for optimal performance.
Compatibility:
Suitable for concrete, cement, wood, metal, and stone surfaces.
Compatible with areas exposed to grease, oil and weak solutions of acid and alkali.
Care:
Allow the paint to fully cure before subjecting it to heavy use.
Clean spills promptly to prevent staining.
Regularly clean the painted surface with mild detergent and water.
Blueperry agriculture (UK)£10.31Visit shop 
Debenhams£17.43Visit shop 
