Coo-Var Anti-Slip Step & Ramp Paint is used to provide a durable and hard-wearing surface with an ...Coo-Var Anti-Slip Step & Ramp Paint is used to provide a durable and hard-wearing surface with an anti-slip finish. Suitable for indoor and outdoor use on concrete, wood, tarmac, stone, brickwork and suitably prepared metal. Low odour & fast drying, hard-wearing, water-based and low slip risk in dry and wet conditions. For best results apply using a brush or roller leaving 6 hours between each coat. All surfaces should be clean, dry and free from dirt or grease. Metals should be primed first using Coo-Var All Metals Primer. This is a smooth matt finish anti- slip paint that is durable and hard wearing. It is a water based Anti-Slip Floor Paint.
This guide helps users of Coo-Var Anti-Slip Step & Ramp Paint to understand its application and benefits. Ideal for anyone seeking to enhance safety on surfaces like concrete, wood, and metal, this paint provides a durable, anti-slip finish suitable for both indoor and outdoor use. Note that proper surface preparation is crucial for optimal results.
All features
Colour
Grey
Model Part Number
118/W460/138/D
Brand
Coo-Var
Extended Product Information
FAQs
What surfaces can I use this paint on?
Coo-Var Anti-Slip Step & Ramp Paint can be used on concrete, wood, tarmac, stone, brickwork, and suitably prepared metal surfaces.
Is priming required?
Yes, metal surfaces require priming with Coo-Var All Metals Primer before applying the anti-slip paint.
How many coats of paint are needed?
Apply at least two coats of paint for optimal durability and anti-slip performance.
What is the drying time between coats?
Allow 6 hours of drying time between each coat.
Can this paint be used outdoors?
Yes, Coo-Var Anti-Slip Step & Ramp Paint is suitable for both indoor and outdoor use.
How do I clean the painted surface?
Clean spills immediately with water. Regular cleaning with a mild detergent and water is sufficient.
What is the finish like?
The paint has a smooth matt finish.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared, clean, and free of any contaminants. If painting metal, confirm that primer has been applied.
The finish is not anti-slip.
Ensure that the paint has been thoroughly mixed and applied in the recommended coats. Check for any application issues.
Paint is taking too long to dry.
Ensure that the area is well-ventilated and the temperature is within the recommended range. High humidity may also affect drying times.
Pros and Cons
Pros
Provides a safer surface by reducing slip hazards.
Offers excellent durability for long-lasting performance.
Suitable for use on a wide range of materials and environments.
Water-based formulation is low odor and easy to clean up.
Fast drying time allows for quick project completion.
Cons
Requires proper surface preparation for optimal adhesion.
May require multiple coats for complete coverage.
Specific metal surfaces require priming before application.
The finish is matt which may not be ideal for all aesthetic preferences.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from dirt, grease, and any loose materials. Remove any existing coatings that are flaking or peeling.
Priming (Metals): For metal surfaces, apply Coo-Var All Metals Primer before applying the anti-slip paint.
Application: Stir the paint thoroughly before use. Apply using a brush or roller.
Coats: Apply at least two coats for best results, allowing 6 hours of drying time between coats.
Drying Time: Allow the paint to fully dry before use. Drying times may vary depending on environmental conditions (temperature and humidity).
Compatibility: Compatible with concrete, wood, tarmac, stone, brickwork, and metal (with primer). Avoid applying in extreme weather conditions (very hot or very cold).
Care: Clean spills immediately with water. Regular cleaning with a mild detergent and water is sufficient to maintain the surface.