Frog Tape Delicate Surface Painters Tape - 36mm X 55 Metres - 4 Pack

PaintBlock Technology is an exclusive super-absorbent polymer in FrogTape that reacts with latex paint to form a micro-barrier. This barrier seals the edge of the tape, preventing paint from seeping underneath and ensuring crisp, clean paint lines.

Yes, FrogTape Delicate Surface Painters Tape is specifically designed for this. However, the paint must be dry to the touch, which typically means at least 24 hours after application. Always test on a small area first.

FrogTape Delicate Surface Painters Tape can be removed cleanly from most surfaces for up to 60 days after application. However, for the best results and to ensure a sharp line, it is recommended to remove the tape soon after painting is complete.

It is recommended for delicate surfaces such as fresh paint (dry to the touch), coated wallpaper, veneer, laminate, and vinyl. Always test compatibility on a small, inconspicuous area before full application.

No, FrogTape Delicate Surface Painters Tape is intended for interior use only.

Delicate Surface tape has light adhesion, making it ideal for sensitive surfaces. Other FrogTape products like Multi-Surface or ProLine may have stronger adhesion for different applications and surfaces.

Store the tape in its original canister in a cool, dry place away from direct sunlight and extreme temperatures to preserve its adhesive properties and prevent damage.

Ensure the tape edge was pressed down firmly. Check if the surface was completely dry before applying tape and paint. For very porous surfaces, consider a second thin coat of paint after the first has dried.

The surface may not be clean or dry. Ensure there is no dust, oil, or moisture. For surfaces like glossy paint or laminate, a test patch is crucial as this tape has light adhesion.

While designed for delicate surfaces, always test first. If residue occurs, it can often be removed with a mild solvent like mineral spirits (test solvent in an inconspicuous area first). Ensure removal is done slowly and at a 45-degree angle.

Ensure the tape is applied in a straight line and pressed down firmly. For extremely detailed work, consider using a very thin second coat of paint or a fine brush for any minor imperfections.