E-Tech XHT High Temperature Paint - Clear

The temperature rating is 650°C (1202°F).

Yes, it is ideal for exhaust manifolds and other high-temperature components.

While not always necessary, using a high-temperature primer can improve adhesion and the final finish, especially on bare metal surfaces.

Clean the surface thoroughly, remove any rust, and sand it to provide a good surface for the paint to adhere to.

Apply multiple thin coats rather than one thick coat for the best results. Allow time for each coat to dry before applying the next.

Curing time varies depending on the ambient temperature and humidity. Always refer to the instructions on the can for specific curing times. Often, a heat cycle is required to fully cure the paint.

Yes, E-Tech XHT Clear is resistant to petrol, diesel, oil, and other engine bay chemicals.

This product is designed for metal surfaces. It is not recommended for use on plastic.

This typically indicates inadequate surface preparation. Ensure the surface is clean and properly sanded before reapplication. Consider using a primer designed for high-temperature applications.

Ensure the surface is completely free of oil, grease, and other contaminants. Sand the surface to provide a good key for the paint. Apply the paint in thin, even coats.

Apply thinner coats and ensure you are holding the can the correct distance from the surface. Avoid applying paint in direct sunlight or windy conditions.