E-Tech Technik 2 in 1 Filler & Primer - 400ml

You can use the E-Tech Technik Filler & Primer on most painted or unpainted metal surfaces, rigid plastics, glass fiber, wood, and masonry.

Allow the filler & primer to dry completely. Drying time is typically 1-2 hours, depending on environmental conditions. Always check for full dryness before sanding.

Yes, the E-Tech Technik Filler & Primer is suitable for use on rigid plastics, making it ideal for plastic bumpers.

Apply thin, even coats. Multiple coats may be necessary to fill deeper imperfections or achieve the desired finish. Always allow each coat to dry completely before applying the next.

No, the E-Tech Technik Filler & Primer is a 2-in-1 product that fills and primes the surface, eliminating the need for a separate primer application.

Use fine-grit sandpaper (e.g., 320-grit or higher) for sanding after the filler & primer has dried.

Ensure the surface is properly cleaned and degreased before application. If necessary, lightly sand the surface to improve adhesion.

Apply thinner coats and avoid holding the can too close to the surface. Allow sufficient drying time between coats.

Use finer grit sandpaper and ensure even pressure during sanding. Additional coats may be required to fill deeper imperfections.