E-Tech Headlight Clear Coat - 200ml

The amount needed varies, but the 200ml can should cover multiple headlights with multiple coats. Applying thin coats is best to achieve the best result.

This clear coat is specifically formulated for headlights but can be used on taillights, testing in an inconspicuous area is advised.

The longevity depends on environmental conditions, but the clear coat provides long-lasting protection against UV rays and weathering.

If runs or sags occur, allow the clear coat to dry completely. Lightly sand the area with fine-grit sandpaper, and reapply a thin coat.

Sanding is usually necessary if there is oxidation or damage. Follow the instructions on the restoration kit or product you are using.

No, apply the clear coat in a well-ventilated area, away from direct sunlight, for best results.

Ensure the headlight surface is completely clean and dry before application. Apply thinner coats and avoid excessive spraying. If the issue persists, lightly sand the surface and reapply.

Proper surface preparation is crucial. Ensure the headlight surface is properly cleaned and sanded. Apply multiple thin coats, allowing each coat to dry fully. If the problem continues, remove the clear coat and start again.