Motip Vinyl Spray Black 400ml - 2 Pack

Clean the surface with a suitable cleaner to remove dirt, grease, and any loose particles. Ensure the surface is completely dry before applying the spray.

Apply thin, even coats, and allow each coat to dry before applying the next. The number of coats needed will depend on the surface condition and desired result. Two to three coats are generally sufficient.

The drying time may vary; refer to the product label for specific instructions. Generally, allow about 10-15 minutes between coats.

This product is designed for most types of leather and vinyl. However, it's always recommended to test it on a small, inconspicuous area first to ensure compatibility.

Store the cans in a cool, dry place, away from direct sunlight and heat sources. Keep them out of reach of children.

No, this product is specifically designed for leather and vinyl surfaces. It is not recommended for use on fabric.

Clean the nozzle with a solvent-based cleaner or a fine needle. Make sure the nozzle is properly attached.

Clean the nozzle with a solvent-based cleaner or a fine needle. Ensure the nozzle is properly attached before use.

Apply thinner coats and maintain the correct spraying distance. Ensure the surface is clean and properly prepared.

Test the spray on an inconspicuous area before applying it to the entire surface. If necessary, consider blending the color by feathering the edges.