Sadolin Extra Durable Woodstain - African Walnut - 500ML

The lifespan of the woodstain depends on environmental conditions and the amount of wear. However, it provides long-lasting protection, typically lasting several years before needing reapplication.

No, Sadolin Extra Durable Woodstain is not recommended for decking or areas with heavy wear and abrasion. It is designed for joinery such as doors and windows.

For optimal protection, apply at least two coats. For new or bare wood, three coats are recommended, especially when using a lighter color.

For new wood, using Sadolin Classic as a base coat is recommended, particularly for hardwoods, to enhance durability.

It is best to apply the woodstain in temperatures between 10°C and 25°C. Avoid applying in excessively cold or humid conditions, as this can affect drying times and the final finish.

Clean your brushes and tools immediately after use with a suitable solvent, such as white spirit. Dispose of waste responsibly.

If the woodstain comes into contact with your skin, wash the affected area thoroughly with soap and water. If irritation persists, seek medical advice.

Store the leftover woodstain in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the container is tightly sealed to prevent drying out.

Ensure proper surface preparation by sanding and cleaning the surface before application. Remove any loose coatings and reapply the woodstain.

Apply the woodstain evenly, and avoid over-brushing. Ensure the wood is properly prepared and dry before application. Apply multiple thin coats rather than one thick coat.

Ensure adequate ventilation and appropriate temperature during application. Avoid applying in damp conditions. Check the product label for recommended drying times.

Ensure you have applied the recommended number of coats. For new wood, consider using Sadolin Classic as a base coat.

The final color can vary depending on the wood type. Test the color on a small, inconspicuous area first.