Hammerite Metal Paint Smooth White - 400ml Aerosol

No, this specific aerosol paint is designed for outdoor use only.

You should allow at least 15 minutes of drying time between each of the 3-4 coats.

You do not need a primer for most rusted or ferrous metals, but you must use a special metal primer for bare zinc, aluminum, or galvanized surfaces.

For maximum protection, apply 3 to 4 light, even coats.

Do not expose the canister to temperatures exceeding 50 degrees Celsius (122 degrees Fahrenheit).

Remove loose paint and rust with a wire brush, clean with diluted detergent, remove grease with a solvent cleaner, and ensure the surface is dry.

Clear the nozzle by inverting the can and spraying for 2 seconds. If still blocked, you may need to wipe the nozzle tip with thinners.

You are likely holding the can too close to the surface or applying the coat too heavily. Use lighter, faster sweeping motions.

Ensure the surface was thoroughly cleaned of all grease and loose rust. If working on galvanized or aluminum, a special primer is required.