Shopping.co.uk

POLYPIPE BUILDING PRODUCTS Soil System - SB417W

POLYPIPE BUILDING PRODUCTS Soil System - SB417W

110mm White Double Socket Bend manufactured by Polypipe Building Products part of the Soil Systems...

Best current price£26.81from Bradfords

Best offers

Shopping.co.uk recommended and popular offers

All Offers

2 offers from £26.81 - £29.99

View price history by clicking the chart icon.

BradfordsPolypipe 110Mm Soil 92.5Deg Bend Double Socket Sb417w White
£25.00 delivery
£26.81
Visit shop
Robert DyasPolypipe Building Products SB417W | 110mm Double Socket Bend - White
£2.95 delivery
£29.99
Visit shop

Product Information

Full details

This guide is for plumbers and DIY enthusiasts working on drainage systems. The POLYPIPE BUILDING PRODUCTS Soil System SB417W offers a reliable 92.5° bend for efficient waste and foul smell removal, ensuring quick and trouble-free installation. A key consideration is its PVC material, which requires specific joining methods for optimal performance.

All features

Model Part NumberSB417W
BrandPOLYPIPE BUILDING PRODUCTS

Extended Product Information

FAQs

What is the angle of the SB417W bend?

The SB417W is a 92.5° double socket bend.

What material is the SB417W made from?

It is manufactured from PVC (Polyvinyl Chloride).

What are the dimensions of this product?

The dimensions are approximately H:127.0 x W:210.0 x D:220.0 cm, and it weighs 0.5 kg.

Can this bend be used for both push-fit and solvent weld connections?

Yes, this fitting is designed to accommodate both push-fit ring seal and solvent weld installation methods.

Is this compatible with other brands of 110mm soil pipe?

It is designed for compatibility with standard 110mm soil and waste systems, but best results are achieved when used with other POLYPIPE BUILDING PRODUCTS components.

How should I clean this fitting if it becomes dirty?

Clean the exterior with a damp cloth. Avoid using abrasive cleaners or harsh solvents that could damage the PVC.

What is the main purpose of this specific bend?

Its primary purpose is to facilitate the efficient flow of waste and foul smells out of a building by providing a precise 92.5° change in direction within the drainage system.

Troubleshooting

Leak at the joint

Ensure the pipe was fully inserted into the socket and that the connection method (push-fit or solvent weld) was applied correctly and completely. For solvent weld, check for proper curing time before use. Re-seal or re-join if necessary.

Difficulty connecting pipes

Clean the pipe ends and socket. Ensure no debris is present. If using solvent weld, ensure the correct solvent cement is used. For push-fit, check the integrity of the rubber seal and consider a small amount of silicone lubricant if resistance is high.

Slow drainage after installation

Verify the angle of the bend is not too acute for the flow rate, and check for any obstructions in adjacent pipes or the main line. Ensure the entire system has adequate fall.

Pros and Cons

Pros

  • Facilitates efficient waste and odor removal with its specific angle.
  • Provides installation flexibility with both push-fit and solvent weld options.
  • Durable PVC construction ensures a long service life.
  • Standard 110mm size offers broad compatibility.
  • Easy to handle due to its light weight (0.5 kg).

Cons

  • Requires careful attention to joining methods (push-fit or solvent weld) to ensure a watertight seal.
  • PVC material may be sensitive to extreme temperatures or certain aggressive chemicals.
  • Specific angle means it's suited only for 92.5° changes in direction.

Setup, Compatibility & Care

Setup:

  1. Prepare Ends: Ensure the ends of the pipes to be joined are clean, dry, and free from debris. For solvent welding, abrade the surfaces lightly according to manufacturer guidelines.
  2. Apply Solvent (if applicable): Apply solvent cement evenly to both the pipe end and the inside of the socket using an applicator.
  3. Join: Immediately push the pipe fully into the socket with a slight twisting motion. Hold for a few seconds to set.
  4. Push-Fit Connection: For push-fit connections, ensure the ring seal is in place. Lubricate the pipe end if necessary and push it firmly into the socket until it reaches the stop.

Compatibility:

  • Compatible with other 110mm (4-inch) PVC soil and waste pipes and fittings.
  • Ensure all connecting pipes and fittings are of the same diameter (110mm) and material type for optimal results.

Care:

  • Periodically check drainage systems for leaks or blockages.
  • Avoid pouring harsh chemicals or excessive grease down drains, as this can degrade PVC and cause clogs.

Similar items

Polypipe Waste Push Fit Knuckle Bend - 40mm - 90deg - WhiteFrom £4Adjustable Bend - Polypipe - SAB90BFrom £41FloPlast White Round Downpipe Offset Bend - 112.5° - 68mmFrom £4Polypipe - 110mm Bend - SB409WFrom £23McAlpine 1 1/2" 90 Degree Multifit Bend x BSP Coupling Nut - T5MFrom £7McAlpine WC Connector - 90deg Bend - WC-CON8VFrom £21FloPlast Shallow Bottle Trap - TB33From £4Viva Bottle Trap - 38mm Water Seal - 1 1/4"From £3Viva 90° Toilet Pan WC Flexible Pipe Connector - 4" (110mm) - PP0002/BFrom £14FloPlast Bottle Trap - 40mmFrom £5Link2Home WiFi Outdoor Weatherproof Camera - SilverFrom £30Wavin OsmaSoil 110mm Ringseal Single Socket Bend 87.5 Degree - WhiteFrom £20

Price History

DatePrice
Visit shop