Wavin OsmaSoil 110mm Ringseal Single Socket Bend 87.5 Degree - White

It is designed for above-ground sanitary waste drainage, carrying waste from domestic, commercial, and industrial installations. It is not intended for rainwater harvesting.

The captive seal is designed to remain securely in place within the socket during installation, preventing it from becoming dislodged and ensuring a watertight connection when the pipe is pushed in.

Yes, the system supports both push-fit and solvent weld joints. For solvent weld, ensure you use appropriate PVC-U solvent cement and primer according to manufacturer guidelines.

It is resistant to most common household acids, alkalis, bleaches, and detergents, making it suitable for typical sanitary waste.

Yes, the Wavin OsmaSoil system is Kitemarked to BS EN 1329-1:2000, confirming it meets relevant European standards for soil and waste pipes.

The bend is 87.5 degrees, which is slightly less than a right angle, providing a smoother flow path compared to a standard 90-degree bend.

Ensure the pipe was fully inserted into the socket and the captive seal is correctly seated. Check the pipe end for damage or debris. If the issue persists, disassemble, clean, and reassemble, or consider using solvent weld for a permanent bond.

Apply a small amount of silicone-based lubricant or approved pipe lubricant to the plain end of the pipe. Ensure the socket is clean and free of obstructions. Do not force the pipe excessively, as this could damage the seal.

Verify the product code and description match your order. While this specific item is listed as white, other colors may be available for different applications. Check packaging for the correct color designation.