Blackfriar Professional Polyurethane Floor Paint - Light Grey 500ml

This paint is suitable for wood, concrete, cement, metal, and brickwork.

You can expect a coverage of 12-14 square meters per litre.

The drying time is 16 hours at 20 degrees Celsius. However, you can apply a second coat after just three hours.

Priming may be necessary depending on the surface. Always check the surface and the paint can's instructions. Always make sure the surface is properly prepared.

Yes, this paint is resistant to oil and grease.

Yes, this paint can be used for both indoor and outdoor applications.

Clean spills immediately. Regularly sweep or mop the floor to remove dirt and debris. Avoid abrasive cleaners.

The finish is gloss.

Ensure the application area has adequate ventilation. Check the temperature and humidity levels, as these can affect drying time. Make sure the surface is clean and free of contaminants.

Ensure the surface was properly prepared before application, including cleaning and sanding. Apply a primer suitable for the surface if necessary.

Ensure the paint is thoroughly stirred. Apply an adequate amount of paint to the surface, and ensure a consistent coat. Consider applying a second coat.

Use a high-quality brush or roller. Apply the paint evenly, avoiding over-brushing or over-rolling. If necessary, lightly sand the surface after the first coat dries.