Johnstone's Trade Professional Gloss - White - 5L

Johnstone's Trade Professional Gloss can be used on wood and metal surfaces, both interior and exterior.

Typically, two coats are recommended for optimal coverage and finish, but this may vary depending on the surface and the existing color.

Clean brushes with a suitable solvent, such as white spirit, immediately after use.

Drying times can vary, but typically, it will be touch dry in 6-8 hours and recoatable after 16-24 hours. Check the product label for specific drying times.

Yes, but ensure the radiator is cool before painting and use a heat-resistant primer if necessary.

Applying with a high-quality brush or roller is recommended. For a smoother finish, use a roller and 'lay off' with a brush.

Ensure adequate ventilation and that the temperature is within the recommended range. Check for excessive humidity.

Apply thinner coats and ensure the brush or roller is of good quality. Lightly sand between coats if necessary.

Ensure the surface is properly primed. Apply a second coat of gloss.