Johnstone's Trade Aqua Guard Gloss Brilliant White - 2.5L

No, this product is specifically designed for interior wood and metal surfaces. It is not formulated to withstand exterior weather conditions.

Yes, provided the existing paint is sound, clean, and lightly sanded. For best adhesion, apply a suitable primer first, such as Johnstone's Trade Advanced Multi-Surface Primer, before applying the Aqua Guard Gloss.

Clean brushes, rollers, and any spills with water immediately after use, before the paint dries. Once dry, it can be difficult to remove.

The paint covers approximately 14 square meters per liter, per coat.

For best results and to achieve the full protective benefits, two coats are generally recommended, especially when covering a different color or bare surface.

Johnstone's Trade Aqua Guard Gloss is formulated to maintain its whiteness and resist yellowing, unlike some traditional solvent-based gloss paints.

This is a water-based paint, offering lower VOCs, easier cleanup with water, and less odor. It provides a durable gloss finish with advanced surface protection.

Ensure the surface was properly prepared, cleaned, and primed according to instructions. Previously painted surfaces may have required more thorough preparation or a specific primer.

Use a high-quality brush or roller suitable for water-based paints. Apply in thin, even coats and avoid overworking the paint. Ensure consistent application speed and pressure.

Check environmental conditions; low temperatures or high humidity can slow drying times. Ensure adequate ventilation in the application area. Avoid applying excessively thick coats.

Ensure the surface underneath is adequately primed and has consistent color. Variations can occur if applying over a dark or unevenly colored base without sufficient coats.