Coach Screws - M10 x 60mm - Zinc Plated

M10 refers to the screw's diameter, which is 10 millimeters. The 60mm indicates the screw's length from the underside of the head to the tip of the thread.

Yes, pre-drilling a pilot hole is highly recommended. It prevents the timber from splitting, makes driving the screw easier, and ensures a stronger, more secure fastening, especially in dense or hardwood materials.

Absolutely. The zinc-plated finish provides enhanced durability and protection against corrosion, making them suitable for outdoor applications such as fencing and exterior joinery.

You will need a socket driver (e.g., a wrench, ratchet, or impact driver with a socket adapter) that correctly fits the hexagon head of the M10 coach screw. A drill will also be needed for pre-drilling pilot holes.

Yes, but they must be used in conjunction with appropriate nylon wall plugs designed for M10 screws. The plugs provide the necessary grip within the masonry material.

DIN571 is a German industrial standard that specifies the dimensions, materials, and other technical requirements for hexagon head wood screws. Conforming to this standard ensures the screws meet a recognized level of quality and performance.

Ensure the pilot hole is correctly sized for the M10 screw and the timber type. For harder woods, a slightly larger pilot hole may be needed. Consider lubricating the screw tip with wax or soap if friction is still high.

Verify you are using the correct size socket driver that fits snugly over the hexagon head. Apply steady, downward pressure while driving the screw and avoid using worn-out sockets or excessive force, especially with power tools.

Check if the pilot hole was too large for the M10 screw, reducing its grip. If possible, consider repositioning or using a repair plug to fill the oversized hole before re-driving. Ensure the screw is fully engaged with the timber.